Cell ageing ovens for precision ageing of polymer materials

Manufactured in 4 or 6 cell configurations, Elastocon's cell ovens for precision ageing of rubber and plastic materials are available with multiple (individual) cell controllers and with a temperature range of 40 °C to 200 °C, 40 °C to 300 °C (HT versions), or +40 °C to +350 °C (EB 37 only).

Elastocon cell oven EB 19

The EB 19 cell oven is equipped with 4 cells, each with individual temperature. Each cell has individual control of the air exchange rate, and has room for 24 test pieces. The oven performs well inside the apparatus requirements in ISO 188 method A, IEC 60811-401, IEC 60216-4-3 and DIN 53508 p. 6.4.

Elastocon cell oven EB 20

The EB 20 cell oven is equipped with 6 cells, each with individual temperature. Each cell has individual control of the air exchange rate, and has room for 24 test pieces. The oven performs well inside the apparatus requirements in ISO 188 method A, IEC 60811-401, IEC 60216-4-3 and DIN 53508 p. 6.4.

Elastocon cell oven EB 37 for temperatures up to +350 °C

The EB 37 cell oven is equipped with 4 cells, each with individual temperature up to +350 °C. Each cell has individual control of the air exchange rate, and has room for 24 test pieces. The oven performs well inside the apparatus requirements in ISO 188 method A, IEC 60811-401, IEC 60216-4-3 and DIN 53508 p. 6.4.

Elastocon cell oven EB 36 for AS/NZS 1660.2.3:1998

The EB 36 cell oven has a stirrer that stirs the air in the cells with about 60 rpm and meets the standard AS/NZS 1660.2.3:1998.

Stand for sample holders, EB 01.01

This stand for cell oven sample holders makes the sample mounting much easier and saves a lot of time.

Rack with extendable shelves for ageing ovens, ERACK11

ERACK11 is a rack with extendable shelves for ageing ovens.

Insert for ASTM testing in cell ovens, EB 07.01

The EB 07.01 insert has three test tubes for testing according to ASTM D865 – Heat Ageing and ASTM D471 – Testing in liquids.

Insert for heat stability test of PVC, EB 07.02

The EB 07.02 insert is used for testing of heat stability of PVC insulations and PVC sheaths for electric and optical fibre cables according to IEC 60811-405, using a cell oven for stable temperature instead of oil.

Insert for ISO 305 testing in cell ovens, EB 07.03

The EB 07.03 insert has nine test tubes for testing in accordance with ISO 305 Method A, using the cell oven for stable temperature instead of oil.